Special Offer: Get 50% off your first 2 months when you do one of the following
Personalized offer codes will be given in each session
MA Business
  • Tuesday, October 19, 2021 · 11:00 AM BST
    Attend this webinar to find out how 5G is unlocking new opportunities for branch businesses. After a difficult 18 months’ branch businesses are rebuilding for the future, and delivering new, connected services can help to accelerate this process. ...
  • Wednesday, October 20, 2021 · 2:00 PM BST
    Diversification has been a common trend in print for years, and as the industry and broader economy recovers many business owners will take a deeper look at diversification to future-proof their companies.

    So, in this session we will be looking a...
  • Wednesday, October 20, 2021 · 3:00 PM BST
    A world first demonstrator from SolutionsPT and the MTC has paved the way for the future of machine learning (ML). With the capacity to rapidly advance the adoption period of ML technologies, the testbed is showing operators, managers and facility...
  • Thursday, October 21, 2021 · 3:00 PM BST
    As technology advances, embedded applications are increasing in complexity resulting in MCUs and SoCs being required to use external memory. While external memory provides the possibility to run large applications, how do you protect your code and...
  • Friday, October 22, 2021 · 11:00 AM BST
    Diversification has been a common trend in print for years, and as the industry and broader economy recovers many business owners will take a deeper look at diversification to future-proof their companies.

    So, in this session we will be looking a...
  • Tuesday, October 26, 2021 · 11:00 AM BST
    A world first demonstrator from SolutionsPT and the MTC has paved the way for the future of machine learning (ML). With the capacity to rapidly advance the adoption period of ML technologies, the testbed is showing operators, managers and facility...
  • Thursday, October 28, 2021 · 11:00 AM BST
    A world first demonstrator from SolutionsPT and the MTC has paved the way for the future of machine learning (ML). With the capacity to rapidly advance the adoption period of ML technologies, the testbed is showing operators, managers and facility...
  • Monday, November 1, 2021 · 2:00 PM GMT
    As economies around the world grapple with the challenge of rapid decarbonisation, there is growing interest in the role that hydrogen will play in a number of different areas.

    In this discussion, held in partnership with Bosch, we will focus o...
  • Tuesday, November 2, 2021 · 4:00 PM GMT
    Aerospace Testing International launches Ask the Expert webinar on NDT

    Aerospace Testing International is excited to launch its series of free to attend ‘Ask the Expert’ webinars, with the first to be held on November 2, 1600 (GMT) on the topic ...
  • Wednesday, November 3, 2021 · 2:00 PM GMT
    As the voltage of electric vehicle motors increase, there is more and more demand being put on the primary and secondary insulation systems used in these motors. During this webinar DuPont technical experts will introduce several different insulat...
  • Wednesday, November 10, 2021 · 10:00 AM GMT
    Do any of these sound familiar?
    - Creating drawings and checking cross-references can take days
    - Creating BOM’s can be time consuming and are stored separately, therefore making it difficult
    - Exporting component data to purchasing is created ma...
  • Thursday, November 11, 2021 · 10:30 AM GMT
    In today’s fast-moving digital landscape, the definition of acceptable Customer Experience (CX) is evolving rapidly. As technology develops, the old ‘patchwork quilt’ approach to adding value to a Partner offering is no longer viable. Bolting addi...
  • Thursday, October 14, 2021 · 3:00 PM BST
    This webinar will take a deep dive into the various motor cooling methods for EVs, including air cooling, oil cooling, water cooling and refrigerant cooling by exploring how each method works, the heat transfer for each, as well as materials used....
  • Wednesday, October 13, 2021 · 3:00 PM BST
    The world of test, especially the one of avionic testing, is moving from proprietary solutions developed by integrator or test system providers to environments more and more based on standards. This tendency is strongly induced by the budget and c...
  • Tuesday, October 12, 2021 · 11:00 AM BST
    How UK businesses can benefit from technology and government support.

    Additive manufacturing technologies can create strong value and competitive advantage for organisations through greater flexibility and agility, whilst lowering the costs and r...
  • Wednesday, October 6, 2021 · 2:00 PM BST
    With the tremendous pace of growth EVs have seen and will continue to see, there are many safety, performance, sustainability and other factors that OEMs and their development partners are navigating. This webinar will delve into the safety and pe...
  • Wednesday, September 29, 2021 · 2:00 PM BST
    Make the Smart Choice; Growing smart cities need engineered equipment and infrastructure to support a successful transformation
    This webinar talks about the evolution of the Smart City from an Original Equipment Manufacturers (OEM) perspective an...
  • Thursday, September 23, 2021 · 2:00 PM BST
    The E-motors in HEV and EV need to meet several key requirements, like compact size and lighter weight, high input voltage (~800V), high efficiency, resistance against chemicals – all while providing superior reliability. The insulation materials...
  • Wednesday, September 22, 2021 · 4:00 PM BST
    The ongoing digital transformation of the aerospace sector is impacting the metrology and quality inspection functions of companies, as OEMs strive to realise increased efficiencies in processes throughout the supply chain.

    The roundtable will g...
  • Tuesday, September 14, 2021 · 3:00 PM BST
    Two key performance concerns for both consumers and EV manufacturers are the ability to charge EV batteries faster and deliver higher acceleration power. Safety is at the core of enabling those benefits. When used in battery separators, Kevlar® Mi...
  • Tuesday, September 14, 2021 · 11:00 AM BST
    The past 18 months have caused unprecedented levels of disruption and mental stresses for employers and staff alike. The challenges faced aren’t taught in the pages of any management handbook.

    Add to that the physical exertion of a job in manufac...
  • Monday, September 13, 2021 · 12:30 PM BST
    Languishing was described by the New York Times as the dominant emotion of 2021. It describes a state in which people are neither depressed nor thriving, and accurately reflects some of the concerns employees now have about their careers since the...
  • Blank-5
    Tuesday, August 10, 2021 · 4:00 PM BST
    Non-destructive testing (NDT) systems based on terahertz technology are emerging as invaluable tools for a wide range of aerospace applications. With very high resolution and safe, non-contact operation, terahertz technology is being used to inspe...
  • Blank-1
    Thursday, July 29, 2021 · 3:00 PM BST
    With heavy increase on post-pandemic recovery as well as economic resurgence, sustainability continues to be a key priority for transport agencies as they focus on how to pivot to new methods to increase mobility and reduce congestion while also i...
  • Blank-2
    Tuesday, October 12, 2021 · 2:00 PM BST
  • Tuesday, October 12, 2021 · 1:30 PM BST
    The world of test, especially the one of avionic testing, is moving from proprietary solutions developed by integrator or test system providers to environments more and more based on standards. This tendency is strongly induced by the budget and c...
  • Blank-2
    Monday, October 11, 2021 · 4:00 PM BST
  • Thursday, October 7, 2021 · 10:00 AM BST
    How UK businesses can benefit from technology and government support.

    Additive manufacturing technologies can create strong value and competitive advantage for organisations through greater flexibility and agility, whilst lowering the costs and r...
  • Tuesday, October 5, 2021 · 3:00 PM BST
    This webinar will take a deep dive into the various motor cooling methods for EVs, including air cooling, oil cooling, water cooling and refrigerant cooling by exploring how each method works, the heat transfer for each, as well as materials used....
  • Friday, October 1, 2021 · 9:00 AM BST
    With the tremendous pace of growth EVs have seen and will continue to see, there are many safety, performance, sustainability and other factors that OEMs and their development partners are navigating. This webinar will delve into the safety and pe...
  • Thursday, September 16, 2021 · 9:00 AM BST
    The E-motors in HEV and EV need to meet several key requirements, like compact size and lighter weight, high input voltage (~800V), high efficiency, resistance against chemicals – all while providing superior reliability. The insulation materials...
  • Tuesday, September 7, 2021 · 2:00 PM BST
    Two key performance concerns for both consumers and EV manufacturers are the ability to charge EV batteries faster and deliver higher acceleration power. Safety is at the core of enabling those benefits. When used in battery separators, Kevlar® Mi...
  • Blank-6
    Wednesday, July 28, 2021 · 2:00 PM BST
    With heavy increase on post-pandemic recovery as well as economic resurgence, sustainability continues to be a key priority for transport agencies as they focus on how to pivot to new methods to increase mobility and reduce congestion while also i...
  • Blank-2
    Friday, July 23, 2021 · 11:00 AM BST
    Our webinar will provide an updated overview of the types of welding fume and the associated risks.

    During this session we will cover the various options in terms of reducing fume generation in particular via the choice of welding gas and also lo...
  • Blank-3
    Monday, July 19, 2021 · 3:00 PM BST
    We’ve all heard about the promised benefits of Digital Engineering - it is how we will make things better, quicker, greener and cheaper. But what does this mean in reality? How do you need to change your business? What kit do you need? And what d...
  • Blank-3
    Monday, July 19, 2021 · 11:00 AM BST
    We’ve all heard about the promised benefits of Digital Engineering - it is how we will make things better, quicker, greener and cheaper. But what does this mean in reality? How do you need to change your business? What kit do you need? And what d...
  • Blank-1
  • Blank-2
    SERIES
    Session 1: Watch now on-demand
    Session 2: Thursday 23rd September 2:00pm BST
    Session 3: Wednesday 6th October 2:00pm BST
    Session 4: Thursday 14th October 3:00pm BST
  • Blank-5
    Webinar Series
  • Blank-3
    Series
    10:00AM - Henkel Loctite

    11:30AM - TFC

    2:00PM - COMSOL

    3:00PM - Stratasys

  • Blank-6
    Series
    Maxon - 10:00am BST

    Dassault - 11:30am BST

    Southco - 2:00pm BST

  • Blank-5
    SERIES
    10:00AM - Dassault
  • Blank-6
    Series
    This webinar series will focus on four major features - Photonics, Semiconductor, Power and Battery - that drive the current autonomous e-mobility industries and are used around the globe. Join us on April 22nd and 29th for informative sessions wi...
  • Webinar Event
    10:00am - Keyence
    2:30pm - IGUS
  • Webinar Event
    7pm - Tuesday 23rd March

    11am - Wednesday 24th March

    7pm - Tuesday 20th April

    7pm - Wednesday 21st April
  • Webinar Event
    10:00am - Maxon
    2:00pm - Igus
    3:30pm - Advanced Witness Systems
  • Webinar series
    Join us for three webinars hosted by leading technology companies:

    10:00 - igus
    11:30 - Beckhoff

    Click on the logos below to register for individual webinars or the button at the bottom to register for the series.